Not Sure What You’re Looking For?

2019 Land Pride RCR1872

Call for Price

Stock Image

Stock Image

In Stock
Stevenson Tractor, Inc.
Land Pride



Ideal for cleaning around the farm, the pond, or empty lots in the city.

Features: Floating 3-Point wich allows deck to follow the terrain,A fully-welded deck that adds additional strength, it´s High blade tip speed ensures clean cut, Single or dual tailwheel on 84", a Heavy-duty tailwheel spindle, All-welded formed channels front to rear, wich add superior strength, and lower clevises for easy hookup

  • Surpassed rugged industry standards: All Land Pride cutters have been designed and tested and meet rigorous voluntary testing procedures specified by ANSI.
  • 5 Year gearbox warranty: Shows our confidence in the gearbox integrity.
  • Cat. 3 driveline with shearbolt: Shearbolt offers maximum driveline protection.
  • Cat. 3 driveline with 2-plate slip-clutch: Slip-clutch driveline offers convenience for continual work.
  • Dual position clevis type 3-point floating top link: Permits deck to follow the terrain for an even cut. Additional set of holes for tractors with shorter top links.
  • Lower clevis type 3-point hitch: Allows for ease of hook-up to tractor. Also adds additional strength allowing for an even pull from the tractor’s lower arms, vs. pulling on a single pin design.
  • Heavy 10 gauge deck construction: Can withstand more abuse than lighter gauge decks.
  • Box tubing deck supports: Makes for a stronger rigid deck.
  • Fully welded deck: Robotic welded. Adds additional strength.
  • Extended cutter front: For increased material flow and added protection.
  • Round back design: Helps discharge grass better than enclosed or partially enclosed cutters.
  • 8 7/8" Deck height: Allows cutter to handle heavy cutting conditions.
  • 1 1/2" to 11 1/2" Cutting height: Provides for a wide range of cutting conditions.
  • Full length skid shoes: Provides sidewall reinforcement and full protection to bottom of sidewall.
  • 1/2" x 3" Heat-treated free swinging blades: Free swinging protects from obstructions. Heat-treated offers longer life.
  • Splined blade bar hub: Allows for tight positive fit of stump jumper and blade bar to gearbox output shaft.
  • 10 Gauge stump jumper: Standard round stump jumper slides over stumps, rocks, and debris.
  • High blade tip speed: 14,853 FPM, Ensures clean cut.
  • 15"Laminated tailwheel: Laminated material is long lasting in rough conditions.
  • 4" x 16" Solid rubber tailwheel: Can’t go flat.
  • Heavy-duty spindle on tailwheel: Tailwheels take a beating, 1 1/4" spindle gives the strength to protect tailwheel assembly.
  • Guarding: Protect against flying debris. Customer must choose to include chain or rubber on the front and rear. Rear Metal Band standard.
  • Driveline Holder: Keeps driveline up out of dirt. Easier hook up of driveline.
  • Model Number: RCR1872
  • Implement Weight: 737 lbs.(With laminated tailwheel, slip clutch driveline, front rubber guards and rear metal band)
  • Hitch: Category l with floating clevis top link, Quick-Hitch ready
  • Cutting Width: 72"
  • Overall Width: 77"
  • Overall Length: 110"
  • Deck Height (Bottom of Deck to Bottom of Skid Shoe):9"
  • Cutting Height:1 1/2" to 11 1/2"
  • Cutting Capacity: 2" Diameter
  • Recommended Tractor Horsepowe: 20-65 horsepower
  • Power Take-Off Speed: 540 rpm
  • Gearbox:1:1.46 Speed-up beveled gears, Cast iron housing
  • Gearbox Oil Capacity & Lubricant: 4 Pints of EP 80-90W oil
  • Deck Material Thickness: 10 Ga. (.134")
  • Side Skirt Material Thickness: 10 Ga. (.134")
  • Deck Construction: All welded deck
  • Skid Construction: Full length welded on
  • Stump Jumper: Round pan 10 ga. x 24" with blade holder bar
  • Blades (2): 1/2" x 3" Heat treated alloy steel, Free-swinging high lift - low friction
  • Blade Bolts: Keyed with harden flat washers & lock nuts.
  • Blade Tip Speed: 14,955 FPM
  • Driveline: ASAE Category 3 shearbolt or 2-plate slip-clutch, Driveline Protection; Optional - Center shearbolt protection; Optional - Center bolt 2 plate slip clutch
  • Tailwheel Mount Assembly: Welded A-arm and caster fork with 360 degree swivel
  • Tailwheel: 4" x 8" x 15" Laminated tire with cast iron hub or 4" x 16" molded rubber tire
  • Front Guard: Optional: Rubber Belting, Accessory: Chain Guard
  • Rear Guard: Standard: Metal Band; Optional: Rubber Belting; Accessory: Chain Guard



Working Width
72 in.
77 in.
110 in.
737 lb.
Recommended HP
20-65 hp

Related Products